Tray Settings Of Tray; Capacity Tray); Loading Paper (Mx-Lcx2) - Sharp MX-5500N User Manual

TRAY SETTINGS OF TRAY 5 (LARGE

CAPACITY TRAY)

LOADING PAPER (MX-LCX2)

Up to 3500 sheets of 8-1/2" x 11" or A4 size paper (21 lbs. (80 g/m
(MX-LCX2).
For detailed information on the paper that can be loaded, see the specifications in the Safety Guide and "Paper Tray
Settings" in the System Settings Guide.
The paper size of the large capacity tray (MX-LCX2) can only be changed by a service technician. If you need to change
the paper size, consult your dealer or nearest SHARP Service Department.
1
2
Indicator
3
line
2
)) can be loaded in the large capacity tray
Pull out the paper tray.
Gently pull the tray out until it stops.
Fan the paper.
Fan the paper well before loading it. If the paper is not fanned,
multiple sheets may feed at once and cause a misfeed.
Place the paper in the center of the
paper table.
Load the paper with the print side face up. The stack must not
be higher than the indicator line (maximum of 3500 sheets).
33