Loading Tab Paper - Sharp MX-5500N User Manual

5
• If you loaded a different type of paper than was loaded previously, change the paper type setting as explained in
"Paper Tray Settings" in the System Settings Guide.
• If you loaded 8K, 16K, or 16KR size paper, or loaded a non-standard size of paper in tray 3, change the paper size
setting as explained in "Paper Tray Settings" in the System Settings Guide. If the paper size setting is not
configured correctly, automatic paper selection will not operate correctly and printing may take place on the wrong
size or type of paper or a misfeed may occur.
Do not place heavy objects on the tray or press down on the tray.
System Settings: Paper Tray Settings
Change these settings when you change the size or type of paper loaded in a tray.
Loading tab paper and transparency film in tray 3
In addition to plain paper, tab paper, transparency film, and other special media can be loaded in tray 3.
To load tab paper or transparency film in tray 3, follow the steps below.

Loading tab paper

To use tab paper, the special guide must be attached as explained below.
1
Gently push the paper tray into the
machine.
Push the tray firmly all the way into the machine.
Take out the tab paper guide.
The guide is stored inside tray 3 as shown. When finished
using tab paper, be sure to replace the guide.
31