1.14 Operating The Mower; Controls; Starting - Step 1; Step 2 - Hayter Double 3 533A Owner's Handbook Manual

OPERATING THE MOWER

Controls

Starting - Step 1

Step 2

Step 3
1.11
Operate all control levers several times and ensure that the cables
move freely. Check that the engine stop and ground drive clutch levers
return freely to their rest position when released.
Move the throttle control lever to the 'Fast' position.
Push the primer button 5 times allowing 2 seconds between each push.
Stand behind the mower and hold the handlebar with your left hand
together with the engine stop lever. With your right hand hold the
engine start - grip and pull slowly until resistance is felt, then pull rap-
idly to crank the engine. Carefully return the start grip to the storage
position when the engine starts.
If the engine does not start after 5 attempts - refer to "Trouble
Shooting".