Changing The Number Of Programming Periods - Carrier edge Owner's Manual

ADVANCED PROGRAMMING OPTIONS

Changing the number of programming periods

Your thermostat is preset with four time periods. You can change this to two.
Here's how to change the number of periods in the day.
1. Open the door.
2. Press and hold the buttons underneath the heat
and cool setpoints simultaneously (the two bottom
buttons on the right) until the screen displays the reset
reminders and 01 in the lower right corner.
3. Press the up arrow button until 01 changes to 06 with 4
(time periods) next to it.
4. Press the rightmost lower button then press the up
arrow button until the screen displays 2.
5. Press the done button.
6. Close the door.
44