Activating Your Vacation Program - Carrier edge Owner's Manual

PROGRAMMING THE THERMOSTAT
7. Press the up or down button on the side and stop at the
desired setting.
8. To change the fan from auto to on, press the fan button
at the top.
9. To change the thermostat mode to heat, cool, Em heat
or heat/cool (auto), press the mode button at the top
until the arrow is next to the option you want.
10. Press the done button.
11. Close the door.

Activating your vacation program

You must schedule a return date to activate your vacation settings before leaving.
The thermostat will begin following the vacation schedule after you've selected
the return date. On 12:00 AM on the return date, the thermostat will
automatically switch to the follow schedule option and run your programmed
schedule.
27