Programming A Vacation Schedule - Carrier edge Owner's Manual

PROGRAMMING THE THERMOSTAT

Programming a vacation schedule

You can program a special heating and cooling schedule to follow when you will
be gone for a vacation or an extended period of time.
1. Open the door.
2. Press the set button on the left side repeatedly until the
screen shows vacation settings on the right side, your
vacation heating and cooling temperatures in the lower
right, and humidify* on the bottom.
3. The selection box is around the heating temperature.
Press the up or down button to select your desired
heating temperature.
4. To adjust your cooling temperature, press the button
under the cool set at temperature on the screen. The
selection box will move to that number.
5. Press the up or down button to select your desired
cooling temperature.
6. To change the humidity setting, press the button under
humidify. The current setting will appear in the center
of the screen.
* Only homeowners with the TP−PRH model of thermostat will see a "humidify" icon.
26