Using Auto Humidify - Carrier edge Owner's Manual

OPERATING THE THERMOSTAT
3. Press the up or down button to change the setting. It is
factory−set at 26% for humidify and 60% for
dehumidify. It there's too much condensation on the
windows, try a lower number. If the air is too dry, try a
higher number. If your home is newer and has quality
windows that create a "tight" home, try a higher setting.
If your home is older, you might need a lower setting.
You can set the humidity between 10% and 46%; the
dehumidify range is from 46% to 66%.
4. Close the door.

Using auto humidify

The auto humidify feature automatically adjusts the amount of humidity
according to the outside temperature. It can be manually adjusted when there is
too much condensation accumulating on windows or the air seems too dry.
Here's how to switch to auto humidify and make adjustments.
1. Open the door. Press the button under humidify. You
will see the current humidity settings.
2. Press the mode button. You will see auto at the top, the
current humidity reading, and 5 set at, which is the
factory setting for the auto humidify mode. (Auto
indicates you have put the thermostat in auto humidify
mode.)
31