Static Ip Bay Configuration - HP ProLiant BL45p User Manual
Hp proliant bl45p server blade
Hide thumbs
Also See for ProLiant BL45p:
- User manual (102 pages) ,
- Maintenance and service manual (89 pages) ,
- Quickspecs (31 pages)
Table of Contents
Advertisement
56
HP ProLiant BL45p Server Blade User Guide
Windows® repository server (only required for Windows® deployment)
– Windows® 2000 or Windows® 2003 OS installed
– Network connection
– CD-ROM drive
– 1.5 GB of available disk space
– TCP/IP networking and an IP address compatible with one of the
– CD-ROM drive and/or diskette drive
– Any of the following Java™ Runtime Environment versions:
Network server with an OS installed
Static IP bay configuration
Static IP bay configuration, implemented using the new Static IP Bay Settings on
the BL p-Class tab, eases the initial deployment of an entire enclosure or the
subsequent deployment of blades within an existing enclosure. While the
preferred method for assigning IP addresses the RILOE to each blade is through
DHCP and DNS, these protocols are not always available on non-production
networks.
following: the iLO Diagnostic Port IP address or an assigned DHCP or
static IP address
1.3.1_02
1.3.1_07
1.3.1_08
1.4.1 for Windows® users only
1.4.2 for Linux users only
Access the Java™ Runtime Environment versions at the HP website
(http://java.sun.com/products/archive/index.html).
Advertisement
Table of Contents
