Static Ip Bay Configuration - HP ProLiant xw25p User Manual

50 HP ProLiant BL25p Server Blade User Guide
Windows® repository server (only required for Windows® deployment)
Network server with an OS installed

Static IP Bay Configuration

Static IP bay configuration, implemented using the new Static IP Bay Settings on
the BL p-Class tab, eases the initial deployment of an entire enclosure or the
subsequent deployment of blades within an existing enclosure. While the
preferred method for assigning IP addresses the iLO to each blade is through
DHCP and DNS, these protocols are not always available on non-production
networks.
Windows® 2000 or Windows® 2003 OS installed
Network connection
CD-ROM drive
1.5 GB of available disk space
TCP/IP networking and an IP address compatible with one of the
following: the iLO Diagnostic Port IP address or an assigned DHCP or
static IP address
CD-ROM drive and/or diskette drive
Any of the following Java™ Runtime Environment versions:
1.3.1_02
1.3.1_07
1.3.1_08
1.4.1 for Windows® users only
1.4.2 for Linux users only
Access the Java™ Runtime Environment versions at the HP website
(http://java.sun.com/products/archive/index.html).