Server Fault Indications Flowchart - HP ProLiant BL45p User Manual

98 HP ProLiant BL45p Server Blade User Guide

Server fault indications flowchart

Symptoms:
Server boots, but a fault event is reported by Insight Management Agents (on
page 71)
Server boots, but the internal health LED or external health LED is red or
amber
Possible causes:
Improperly seated or faulty internal or external component
Unsupported component installed
Redundancy failure
System overtemperature condition
Item
1
2
3
4
5
NOTE: For the location of server LEDs and information on their
statuses, refer to the server documentation.
Refer to
"Management agents (on page 71)" or in the HP ProLiant
Servers Troubleshooting Guide located on the Documentation
CD or on the HP website (http://www.hp.com/support).
• "Integrated Management Log (on page 73)" or in the HP
ProLiant Servers Troubleshooting Guide located on the
Documentation CD or on the HP website
(http://www.hp.com/support).
• "Event list error messages" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD
or on the HP website (http://www.hp.com/support).
Server user guide or setup and installation guide, located on
the Documentation CD or the HP website
(http://www.hp.com/products/servers/proliant-bl/p-class/info)
System Management Homepage at https://localhost:2381
(https://localhost:2381)
"Power-on problems ("Server blade power-on problems
flowchart" on page 91)" or in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on
the HP website (http://www.hp.com/support).