HP ProLiant BL20p Generation 3 User Manual page 80

Connecting Local I/O Devices
1. Connect one end of the RJ-45 network cable to the local I/O cable (1).
2. Connect the other end of the network cable to the 10/100 Ethernet RJ-45
connector on the client PC (2).
Figure 6-1: Connecting an RJ-45 network cable
IMPORTANT: Before removing the local I/O cable, completely log out of the current iLO
session. Do not remove the local I/O cable when the Unit Identification (UID) LED is blinking.
6-2 HP ProLiant BL20p Generation 3 Server Blade User Guide