HP ProLiant BL20p Generation 3 User Manual page 52

Server Blade Configuration and Utilities
To navigate RBSU, use the following keys:
To access RBSU, use the iLO Remote Console and press the F9 key when
prompted during power up.
To navigate the menu system, use the arrow keys.
To make selections, press the Enter key.
RBSU automatically saves settings when you press the Enter key. The utility does
not prompt you for confirmation of settings before you exit the utility. To change a
selected setting, you must select a different setting and press the Enter key.
Table 2-1 contains the default settings for options in primary RBSU menus.
Table 5-1: RBSU Default Settings
Menu/Option
System Options
OS Selection
Embedded Serial Port
Virtual Serial Port
Integrated Diskette Controller
Embedded NIC PXE Support
USB Control
USB 2.0 Control
Standard Boot Order (IPL)
Boot Controller Order
Server Availability
ASR Status
ASR Timeout
Thermal Shutdown
*The default boot order is CD-ROM drive, diskette drive, hard
drive, and network, respectively.
5-8
Default Setting
Port 1 PXE Enabled
USB Enabled
Enabled
*
Smart Array 6i
Enabled
10 minutes
Enabled
HP ProLiant BL20p Generation 3 Server Blade User Guide
continued