Wires Connection - Planet Audio P385UA User Manual

WIRES CONNECTION

FRONT RIGHT RCA OUTPUT REAR RIGHT RCA OUTPUT
RED
FRONT LEFT RCA OUTPUT
REAR LEFT RCA OUTPUT
WHITE
SUBWOOFER OUTPUT
YELLOW
ANTENNA JACK
FIXED ISO CONNECTOR A
1.
2.
3.
4. CONSTANT+12 V DC
5. AUTO ANTENNA B+
6.
7. ACC +12 V DC
8. GROUND
PDF created with FinePrint pdfFactory trial version
RED
WHITE
ISO SOCKET
FIXED ISO SOCKET SKETCH
FIXED ISO CONNECTOR B
1. REAR RIGHT SPEAKER (+)
2. REAR RIGHT SPEAKER (-)
3. FRONT RIGHT SPEAKER (+)
4. FRONT RIGHT SPEAKER (-)
5 . FRONT LEFT SPEAKER (+)
6. FRONT LEFT SPEAKER (-)
7. REAR LEFT SPEAKER (+)
8. REAR LEFT SPEAKER (-)
Page 9
http://www.pdffactory.com
17. SCAN BUTTON
Press the SCN button to scan the radio frequency. If a valid signal has detected,
the current frequency will be hold and blinking for 5 seconds, then press SCN
again to stop scan and remain the current frequency; otherwise, the radio will
go on to scan the other radio frequency 5 seconds later.
18. AUX INPUT JACK
Press the mode button to select auxiliary input playing mode. Then you can
connect any matched external audio device to this socket. Use the volume
knob to adjust volume.
19. EJECT KEY
In the power on state, the loaded disc can be ejected by pressing the EJ key.
20. CD SLOT
21. USB PORT
When needing to play the file in the USB Flash Drive, turn over the plastic
cover cap then insert the USB Flash Drive into the USB Port. The system
will change into the USB mode automatically, and then play the first file in the
USB. When no needing to do USB operation, please cover the plastic cover cap.
22. SD/MMC CARD SLOT
When you need to play the file in the SD/MMC card, insert the SD/MMC card
into the card slot. The system will change into the mode automatically,
and then play the first file in the SD/MMC.
23. FLASHING LED
When the front control panel is removed this indicator flashes.
24. RESET BUTTON
Before operating the unit for the first time, or after replacing the car battery or
changing the connections. You must reset the unit.
Press this button with a cuspidal object. This operation will erase the clock
setting and some stored contents.
Page 6