Connection Description - Planet Audio PI9764B User Manual

Bluetooth enabled-full ipod control, in-dash single-din dvd/mp3/cd am/fm reciever with 7", widescreen touchscreen digital tft monitor, usb and sd memory card ports and front panel aux input
Hide thumbs Also See for PI9764B:
Table of Contents

Advertisement

27
*
Region Code
Q: Why does the unit display REGION ERROR after inserting disc into disc
compartment ?
A: Because the DVD player and disc has respective region code. If the region
codes of them do not match with each other, the DVD player can not play
the disc.
Appendix: region code of DVD:
The Motion Picture Association of America (MPAA) divided the world into
6 regions, and gave every region a code, namely region code. The region
codes and the countries or areas represented by the region codes as
follows:
Region 1: America, Canada, East-Pacific Inlands;
Region 2: Japan, West Europe, North Europe, Egypt, South Africa, Middle
East;
Region 3: South-east Asian countries include Taiwan, Hong Kong, South
Korea, Thailand, indonesia, etc.;
Region 4: Australia, New Zealand, Central South America, South Pacific
Inlands;
Region 5: Russia, Mongolia, Indian Peninsula, Middle Asia, East Europe,
North Korea, North Africa, North-west Asia etc.;
Region 6: China mainland.

1.7 Connection Description

Description of Wires Connection
Mounting Bolt
GREEN
Radio Antenna jack
BLACK
PARKING BRAKE
BLACK
Wiring Connecting Socket 2
WHITE
BLACK
USB
REVERSAL INPUT
KEY GROUND(BLACK)
BLACK
KEY A(BROWN)
Media Deice Cable
KEY B(YELLOW)
1. Parking wire must be connected. And the parking brake must be engaged in order for the monitor to work.
2. Use the clip end of the Ground Wire provided by manufacturer to connect Mounting Screw, using the other
end of the Ground Wire to connect the negative pole of the power source. Otherwise, the video on screen
maybe flashes.
Description of the Wiring Diagram for Socket 1
WIRING CONNECTING SOCKET 1
WIRING CONNECTING PLUG 1
ISO CONNECTOR
YELLOW
SUBWOOFER OUTPUT
MEMORY B+
FUSED
FILTER
BLACK(GND)
BOX 1A
& 10 A
RED
BLACK
IGNITION SWITCH
FUSES
FRONT OUTPUT
BLUE AUTO ANT
+
WHITE
GRAY
FRONT
WHITE / BLACK
GRAY / BLACK
LEFT
SP
+
GREEN
VIOLET
REAR
GREEN / BLACK
VIOLET / BLACK
NOTES:
1. Only speakers with 4 ohms impedance may be used.
2. Ensure that the blue auto antenna cable does not make contact
with any ground connection.
Description of the Wiring Diagram for Socket 2
RED (R)
BROWN
WHITE (L)
AV IN
YELLOW VIDEO
REAR OUTPUT
YELLOW
GREY
VIDEO OUTPUT
YELLOW
BLACK
YELLOW
REAR VIEW CAMERA
Description of Connecting the Parking Brake Line to the Parking Brake System Built in a Car
Parking brake
Parking brake switch
(inside the car)
NOTE: after connecting the Parking Line, the video on the small monitor of the front panel will be display only after braking the car.
Harness
GREEN
RED (R)
WHITE (L)
+
FRONT
RIGHT
SP
+
REAR
WIRING CONNECTING SOCKET 2
WIRING CONNECTING PLUG 2
RED (R)
GREY
WHITE (L)
Parking brake wire(Green)
To metallic body or chassis of the car
8

Advertisement

Table of Contents
loading

Table of Contents