Table of Contents
Advertisement
BLUETOOTH OPERATION
Pair and Connect
Pair the mobile phone with the device before using it.
1. In any mode, prior to pairing and connecting, the BT logo is flashing in the LCD indicating that no
device is connected. To begin pairing, enable BT mode on your mobile phone.
2. When the phone finds the car audio system, the "PLANET AUDIO PC45RGB" name will be displayed.
3. Choose the "PLANET AUDIO PC45RGB" from the device list to pair and connect with the car audio
system. Upon confirming, the BT logo will stop flashing.
4. When pairing is complete, the mobile phone audio will automatically transfer to the car audio system
whenever a call is made or received, or when the mobile phone plays music.
Disconnect or reconnect the bluetooth connection
Press and hold the
Answer a Call
Reject or End a Call
To reject or end the call, press the
Redial Last Dialed Number
Press the
button to redial the last dialed phone number.
Switch Audio Between Car Audio and mobile Phone
During a call, press the volume knob to switch the audio source from the car audio system back to
your mobile phone.
To make a call with this bluetooth handsfree system
a) When linking up the Bluetooth-enabled mobile phone to this bluetooth handsfree system, press
the # button on remote control to access the dial telephone number mode, then press the "0~9",
* and # button on remote control to input the telephone number, the entered number will be shown
on the LCD display.
b) If a number has been incorrectly inputted, press the DEL button on the remote control to delete it.
c) Press the
button to make outgoing call.
Audio Streaming (A2DP)
The unit supports A2DP (advanced audio distribution profile) wireless streaming audio from your
Bluetooth mobile device directly to your head unit.
You can also control your music from the front panel of the head unit using AVRCP (audio video
remote control profile).
1. After pairing, connecting and enabling streaming audio from a compatible mobile device,
press the SRC button to enter BT mode and the "BT AUDIO" will be shown on the LCD display.
2. When a mobile device is paired, music played through that device will automatically be heard
through the car audio system.
3. Press the
or
4. Press the
button to pause or resume music playback.
Push-To-Talk
This Push-To-Talk feature allows direct access to Android and IOS smartphones voice assistant
capability when user establish the bluetooth connection between user's smartphone and this
receiver.
Simply connect directly from this receiver via Bluetooth with
Note:
Before using the Push-To-Talk, user must enable the mobile data on user's smartphone.
To use the navigation feature, switch to the BT Audio source to hear voice commands over your
vehicles speakers.
10
button to disconnect or reconnect the bluetooth connection.
button.
button to play the next or previous on the mobile phone.
button (volume knob).
Advertisement
Table of Contents
