Modem Module - HP EliteBook 8560w Maintenance And Service Manual

Modem module

NOTE: The modem module spare part kit does not include a modem module cable. The modem
module cable is included in the Cable Kit, spare part number 652662-001. For information about
Cable Kit contents, see
Description
56k v.92 MDC data/fax modem module
Before removing the modem module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service access cover (see
6. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
e. Video card fan/heat sink assembly (see
f. Processor heat sink (see
g. Processor (see
Remove the modem module:
1. Turn the computer right-side up, with the front toward you.
2. Remove the two Phillips M2.0×3.0 barrel screws (1) that secure the modem module to the
system board.
3. Disconnect the modem module (2) from the system board by lifting it straight up.
Cable Kit on page 29.
Battery on page
Service access cover on page
Hard drive on page 57)
Optical drive on page
Keyboard on page 64)
Top cover on page 68)
Processor heat sink on page
Processor on page 87)
45).
62)
Video card fan/heat sink assembly on page
83)
Component replacement procedures
Spare part number
628824-001
47).
81)
89