Function Button Board - HP EliteBook 8560w Maintenance And Service Manual

Function button board

Description
Function button board (includes cable)
Before removing the function button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service access cover (see
6. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
Remove the function button board:
1. Position the top cover upside-down, with the front toward you.
2. Remove the tape (1) from the top of the function button board.
3. Remove the two Torx 9M2.5×4.0 screws (2) that secure the function button board to the top
cover.
4. Lift the function button board (3) from the top cover.
Battery on page 45).
Service access cover on page
Hard drive on page 57)
Optical drive on page
Keyboard on page 64)
Top cover on page 68)
62)
Component replacement procedures
Spare part number
652665-001
47).
73