HP EliteBook 8560w Maintenance And Service Manual page 114

e. Video card fan/heat sink assembly (see
f. Processor heat sink (see
g. System board (see
Remove the RJ-11 connector cable:
1. Position the computer right-side up, with the front toward you.
2. Remove the RJ-11 connector cable from the clips and routing channel built into the base
enclosure.
3. Remove the RJ-11 connector cable from the base enclosure.
Reverse this procedure to install the RJ-11 connector cable.
106 Chapter 4 Removal and replacement procedures
Video card fan/heat sink assembly on page
Processor heat sink on page
System board on page
83)
103)
81)