Playback Modes; Select The Playback Mode; Programmed Playback - Tascam CD-200i Owner's Manual

Playback modes

This unit can play tracks using three types of playback
modes.
Continuous playback (default setting)
The tracks on a disc are played back in numerical order.
In folder playback mode, the tracks in the current
playback folder on a data CD are played back in
numerical order.
Shuffle playback
The tracks on the disc are played back in random order
regardless of their track numbers. Playback stops after all
tracks have been played once.
In folder playback mode, the tracks in the playback
folder on a data CD are played back in random order.
See "Folder playback (with data CDs only)" on page 24
for details.

Programmed playback

Tracks are played back in the programmed order. See
"Programmed playback" on page 25 for details.

Select the playback mode

PLAY MODE/INTRO CHECK (SOURCE
Press the
SEL)
key on the main unit or the
on the remote control to cycle through the playback
modes.
During playback, however, only continuous playback
and shuffle playback modes can be set.
To select programmed playback, press the
MODE/INTRO CHECK (SOURCE SEL)
main unit or the PLAY MODE
trol when playback is stopped or no CD is loaded.
PLAY MODE/INTRO CHECK
(SOURCE SEL) key
PLAY MODE
key
PLAY
key on the
key on the remote con-
4 − Playing Back CDs
PLAY MODE key
An indicator for the current mode will appear on the
display as shown below.
No indication
SHUFFLE
MEMORY
The selected playback mode is retained even when the
power is turned off.
Immediately after pressing the PLAY MODE/INTRO
CHECK (SOURCE SEL) key on the main unit or the PLAY
MODE key on the remote control, the selected mode is
shown on the main display area as follows.
Continuous playback mode set: CONTINUE
Shuffle playback mode set: SHUFFLE
Programmed playback mode set: PROGRAM
Programmed playback
To use programmed playback, you must set a program either
before or after setting the playback mode to programmed
playback mode. (See "Select the playback mode" on page
25.)
When in programmed playback mode, press the
READY
key on the main unit or the remote control to start
playback of the set program in order from the first track
SEARCH
(program step 01). Press a
key on the main unit or a search ( Ô / Â , ¯ /  )
key on the remote control to skip to the previous or next
program step.
In programmed playback mode, when playback is stopped
the total number of tracks in the program and the total
program time are shown (total program time is not shown
when using a data CD).
Continuous playback
Shuffle playback
Programmed playback
PLAY/
Ô /  ( Â / ¯ )
25
TASCAM CD-200i