Selecting The Cd Input Source; Repeating The Current Track; Selecting Another Track; Searching For A Passage Within A Track - Grundig RRCD 2700 MP3 Manual

CD MODE

Selecting the CD input source

1 Move the »RADIO OFF/TAPE
Press »OPEN « to open the CD compartment.
2
3 Insert a CD in the compartment with its label facing upwards.
Close the lid of the CD compartment by pressing
4
– The device scans the content of the CD. The total number of tracks appears in the
display.
CD playback
Press » II« to start playback.
1
– Playback always starts with the first file of the first album (MP3/WMA) or with the first
track (CD-DA).
– Display: the current track number.
– Playback stops at the end of the CD.
Note:
The current folder number can be displayed in MP3/WMA mode by pressing »
or » « briefly.
Press » II« to pause playback.
2
3 Press » II« to resume normal playback.
Press » « to end playback.
4
7

Repeating the current track

Briefly press » « during playback.
1 8
– The track is repeated from the beginning.

Selecting another track

1 During playback, keep pressing »
hear appears in the display.
– Playback of the selected track starts automatically.

Searching for a passage within a track

1 During playback, press »
passage.
– If » 8 « or » 9 « are released, playback starts.
Note:
During the search, the volume is reduced in CD-DA mode; in MP3 mode the search starts
with a delay.
Selecting folders and tracks (only MP3/WMA)
During playback, select the desired album with »
1
Note:
Pressing briefly displays the current folder number. When the folder display flashes, select
the desired folder with »
________________________________________________________
CD« switch to the »CD« position.
8 « or »
8 « or » 9 « and hold it down until you have found the
« or » «.
»OPEN «.
9 « until the number of the track you want to
« or »
«
«.
29