Radio Mode; Stereo/Mono Reception - Grundig RRCD 2700 MP3 Manual

RADIO MODE

Stereo/mono reception

If the device receives an FM stereo station,
the signal from the FM stereo station is weak, you can improve the sound quality by switching
to mono reception.
1
2
CD MODE
When burning CD-R and CD-RWs with audio files, various problems may arise which could
lead to problems with playback. This can be caused by faulty software or hardware settings
or by the CD being used. Should such problems arise, contact the customer services of your
CD burner or software manufacturer or look for relevant information, for example on the
Internet. When you are making audio CDs, observe all legal guidelines and ensure that the
copyright of third parties is not infringed.
Always keep the CD compartment closed to prevent dust from collecting on the laser optics.
Do not attach adhesive labels to CDs. Keep the surfaces of CDs clean. You can play standard
12 cm CDs as well as 8 cm CDs on your device. An adapter is not necessary.
28
Switch to mono reception with
Switch to stereo reception with
________________________________________________________
The device is suitable for music CDs displaying the logo shown here (CD-DA) and for
CD-Rs and CD-RWs with audio data or MP3 and WMA formats.
In MP3 mode, the terms "album" and "file" are very important. "Album" corresponds
to a folder on a PC, "file" to a file on a PC or a CD-DA track. The device reads MP3
data with a maximum of 255 tracks per folder. An MP3 CD may not contain more
than 511 tracks and 256 folders in total.
The device sorts the folders, or the tracks in a folder, by name into alphabetical order.
If you want to order them differently, change the name of the track or folder and put a
number before the name.
_________________________________________________
•
»FM ST. « appears in the display. However, if
»FM MONO FM STEREO
»FM MONO FM STEREO
(»FM
MW« MONO«).
(»FM
MW« STEREO«).