LaCie 500 Series LCD Monitor
User Manual
2. Installing Your LaCie 500 Series LCD Monitor
Fig. 01
To attach the LCD monitor to your system, follow these instruc-
tions:
1. Turn off the power to your computer.
2. For the PC or Mac® with DVI digital output: attach the DVI
signal cable to the display interface of your system (Fig. 01).
Tighten all screws.
3. For the PC with analog output: attach the 15-pin mini D-SUB
to DVI-A signal cable to the display interface of your system
(Fig. 02).
4. For the Mac with analog output: first connect the Macintosh
cable adapter (furnished separate from LaCie) to the com-
puter display interface. Second, attach the 15-pin mini D-SUB
signal cable to the Macintosh cable adapter (Fig. 03).
continued on next page>>
Mac Cable Adaptor
(Not included)
Fig. 02
TECHNICAL
NOTE: Some Macintosh systems do not require a
Macintosh cable adapter.
Installing Your LaCie Monitor
Fig. 03
page 9