Figure 3.7 Wireless Settings > Wlan > Advanced - Advantech EKI-6333AC-M12 Series User Manual

Item
Lazy WDS
BSSID
Operation Frequency
Country Code
Band
Network Mode
Channel Bandwidth
Channel / Frequency
Submit
3.4.2.2 Advanced
To access this page, click Wireless Settings > WLAN > Advanced.
The following table describes the items in the previous figure.
Item
Access Point Settings
Beacon Interval
Data Beacon Rate
(DTIM)
Advanced Wireless Setting
Transmission Power
Submit
EKI-6333AC-M12 Series User Manual
Description
Click the checkbox to enable the lazy WDS function.
Display the MAC address of the device.
Click the drop-down menu to select the country code to specify
different selectable channels. Some specific channels and/or
operational frequency bands are country dependent.
Click the drop-down menu to select the band channel.
Click the drop-down menu to select the network mode.
Click the drop-down menu to select the band and channel
bandwidth.
Select the 2.4 or 5G wireless frequency to the least congested
channel. The available settings on a 2.4G setting are 2.412 GHz to
2.484 GHz. For 5G, the available settings are 5.18 GHz to 5.825
GHz. The function is only enabled when Operation Mode is set to
Access Point.
Click Submit to save the values and update the screen.
Figure 3.7 Wireless Settings > WLAN > Advanced
Description
Enter a value (20-999) to specify the frequency interval to
broadcast packets.
DTIM, which stands for Delivery Traffic Indication Message, is
contained in the data packets. It is for enhancing the wireless
transmission efficiency. The default is set to 2. Enter a value
between 1 and 255.
Use the scroll bar to set the transmission power of the WiFi. By
default the AP transmits at full power: Full, Half, Quarter.
Click Submit to save the values and update the screen.
21