Advanced; Figure 3.6 Wireless Settings > Advanced - Advantech EKI-6333AC-A Series User Manual

Item
Band
Channel bandwidth
or
Band / Channel
bandwidth
Channel / Frequency
Apply
3.4.2

Advanced

To access this page, click Wireless Settings > Advanced.
The following table describes the items in the previous figure.
Item
Access Point Settings
Beacon Interval
Data Beacon Rate
(DTIM)
20/40 Coexistence
Description
Click the drop-down menu to select the band channel.
Click the drop-down menu to select the band and channel
bandwidth.
Select the 2.4 or 5G wireless frequency to the least congested
channel. The available settings on a 2.4G setting are 2.412 GHz to
2.462 GHz. For 5G, the available settings are 5.18 GHz to 5.825
GHz. The function is only enabled when Operation Mode is set to
Access Point.
Click Apply to save the values and update the screen.
Figure 3.6 Wireless Settings > Advanced
Description
Enter a value (20-999) to specify the frequency interval to
broadcast packets.
DTIM, which stands for Delivery Traffic Indication Message, is
contained in the data packets. It is for enhancing the wireless
transmission efficiency. The default is set to 2. Enter a value
between 1 and 255.
Select enable to select 20/40 MHz coexistence. Once enabled, the
device allows clients operating only on a single channel (20 MHz)
to connect to the wireless network (default: disabled).
24 EKI-6333AC-A Series User Manual