TX/RX SETTINGS (MF4690PL Only)
2. FAX/TEL OPT. SET
1. RING START TIME
2. F/T RING TIME
3. F/T SWITCH
ACTION
3. INCOMING RING
ON
RING COUNT
OFF
Sets the optional items in the <FaxTel> mode. (See Chapter 4,
"Sending and Receiving (MF4690PL Only)," in the Reference
Guide.)
Sets the time the machine takes to check whether a call is a fax
or a voice call. (0SEC–30SEC)
Selects the ring length for voice calls. (15SEC–300SEC)
Selects whether the machine switches to the receive mode after
the ring time has elapsed, or whether if disconnects the call.
–
RECEIVE
–
DISCONNECT
Sets whether the optional handset or the external telephone
rings when the machine receives a fax. This function is only
available when the <RX MODE> is set to <FaxOnly> or <FaxTel>.
The optional handset or the telephone rings when the machine
receives a fax if an external telephone is connected.
Sets the number of incoming rings before the machine answers.
(1TIMES–99TIMES)
The optional handset or the telephone does not ring when the
machine receives a fax. (In the Sleep mode, the telephone may
ring one or two times.)
12-17