Canon MF4600 Series Basic Operation Manual page 215

Message
MEMORY FULL
* MF4690PL Only
Description
– The machine is full of jobs.
– The number of TX/RX
jobs that can be stored
in memory reached the
maximum.*
Action
– Print, send, or delete any
documents stored in
memory.
– Divide the document stack
or data into a few parts and
try again one by one.
– Send the document with
low resolution.
– When this message appears
during using the ADF, the
scanning document stops
halfway. In this case, clear
the paper jam from the ADF.
– The maximum numbers
of jobs that can be stored
in memory are as follows
(Based on the condition that
the other party sends the
fax by MF4690PL with ITU-T
No. 1 Chart standard mode);
Up to 70 jobs for sending or
90 jobs for receiving, 95 fax
jobs including sending and
receiving, or 75 e-mail and
I-fax jobs for receiving.
Wait for the machine to send
any documents in memory.
Also print, send, or delete
any documents stored in
memory.
11-17