Canon MF4600 Series Basic Operation Manual page 124

3
Press the desired one-touch key (01 to 07).
If you pressed a wrong key, press [Clear] and try again.
If you want to adjust the image quality and density, see "Scan Settings, " on p. 4-4.
Ex.
T E L = 0 1 2 3 X X X X X X
[ 0 5 ] C A N O N
4
Press [Start].
When you set the documents on the platen glass, press [
press [Start] for each document. When scanning is complete, press [OK] to start sending.
When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX SETTINGS> in <TX/RX SETTINGS>, and if
you have specified the destination by any other method than using numeric keys, the machine starts
scanning automatically without pressing [Start], after the preset time for this setting is elapsed.
U S A
] or [ ] to select the document size, then
4-41