Adjusting The Playback Speed; Adjusting The Playback Speed Without Changing The Pitch; Changing The Playback Speed Temporarily (Pitch Bend Function); Power On Playback - Denon DN-SC3900 Owner's Manual

A, B EXIT/ VINYL SHIFT
RELOOP
PITCH RANGE PITCH BEND +/–
KEY ADJUST

Adjusting the playback speed

Use the pitch slider to adjust the playback speed (pitch).
1
Press PITCH RANGE
The PITCH RANGE indicator lights on the display.
Each time the button is pressed, the range in which the playback
speed can be adjusted switches as shown below.
6 %
OFF
2
Move the pitch slider, and adjust to the desired
playback speed.
When the following 2 conditions are fulfilled on this device, the range
that can be adjusted with the pitch slider is –80 – +100 %.
• When the Start Time and Stop Time are set to other than 0
(vpage 18)
VINYL
• When VINYL mode is on (
Adjusting the playback speed without
changing the pitch
Pitch slider
When the playback speed is adjusted, the pitch is not changed.
KEY ADJUST
Press .
The KEY ADJ. indicator lights on the display.
Changing the playback speed temporarily
(pitch bend function)
This function temporarily changes the playback speed.
There are 2 methods for changing the playback speed.
n Using the PITCH BEND buttons
Press
PITCH BEND +
.
PITCH BEND –
10 % 16 %
n Using the vinyl disc
100%
When VINYL mode is off
1
2
is lit orange)
When VINYL mode is on
1
2
You can change the sensitivity at which the platter effect starts
to work by selecting "Utility" – "Preset Setting" – "Platter
Sens."(vpage 41).

Power on playback

If the power is turned on when a disc is loaded in the disc loading slot,
playback starts from the first track on the disc.
Set "Utility" – "Preset Setting" – "Power on Play"
(vpage 42) to "ON".
When using a finalized CD-ROM/CD-R/CD-RW as a data CD, only save
music files directly root of the disc.
25
Operations during playback
PITCH BEND +/–
.
Playback speed is increased while the button is
being pressed.
Playback speed is decreased while the button is
being pressed.
VINYL VINYL
Press , and illumination goes out.
The platter stops while playback continues, and the mode
switches to BEND/SCRATCH mode.
Turn the vinyl disc during playback.
Turn the vinyl disc to the right to increase the pitch, and left to
decrease the pitch.
VINYL VINYL
Press , and illumination lights orange.
Turn the vinyl disc during playback.
The playback speed changes according to the rotation speed
of the vinyl deck.