Supported media and files
The following media and files can be played back on this unit.
Supported media
Disc
Disc type
: CD, CD-R, CD-RW, CD-ROM
Format
: CD-DA (CD-TEXT compatible),
CD-ROM (ISO9660/Joliet format)
USB memory device
Media type
: FLASH, HDD
Format
: FAT16/FAT32, HFS+ (Read only)
NOTE
• When a multisession disc is used, the more sessions there are, the
more time will be required to read the disc.
• When HFS+ is used, this unit may not be able to recognize the file
name if characters other than ISO8859-1 registered characters or
character codes other than Japanese are used.
Playable files
File formats
Extension
MP3
.mp3
CBR/VBR 44.1kHz Stereo
.m4a
AAC
CBR/VBR 44.1kHz Stereo
.aac
WAV
.wav
44.1kHz 16/24bit Stereo
.aif
AIFF
44.1kHz 16/24bit Stereo
.aiff
NOTE
DRM protected files cannot be played back.
Assembly
Before use, install the provided platter, slip mat and vinyl disc with
the screw.
1
Install the platter on the motor unit.
2
Place the slip mat on the platter.
3
Align the vinyl disc with the shaft of the motor, and
insert the shaft into the vinyl disc hole.
4
Fix the vinyl disc with 2 screws.
NOTE
• Do not touch the motor unit.
• Use the slip mat that is supplied with the unit. Using a different slip
mat may result in abnormal playback sound.
• Do not turn the power on until this assembly procedure is complete.
• When transporting this unit, remove the vinyl disc and platter, and
package them separately for transportation.
Details
5
Screw
Vinyl disc
Slip mat
Platter
Motor unit
Motor shaft