Hot List; Auto Bpm Counter - Denon DN-SC3900 Owner's Manual

Hot list

When the track list (search screen) is being displayed, a selected track
can be temporarily registered to the music file list (hot list).
NOTE
When the unit power is switched off, all of the contents registered to
the created hot list are cleared.
n Registering to the hot list
1
Turn SEL. to display the track you want to register.
2
Press HOT LIST ADD/REMOVE .
"Add" is displayed, and the selected track is registered to the
hot list.
n Playing tracks registered to the hot list
1
Hold down SHIFT , and press TIME
The hot list is shown in the display.
2
Turn SEL. to select the track you want to play.
3
SEL.
Press
The cue standby mode is set at the start of the selected tracks.
n Clearing tracks from the hot list
1
Hold down
The hot list is shown in the display.
2
SEL.
Turn to select the track you want to clear.
3
Press and hold
The selected track is cleared.
n Sharing hot lists
When multiple DN-SC3900 units, are connected via a network, hot
lists can be shared between units.
For details, "Sharing hot list information" (vpage 32).

Auto BPM counter

During playback or cue standby, the tempo (BPM) of the track is
automatically measured and displayed.
.
n Auto BPM counter
Press and hold TAP
• The auto BPM counter switches on, and the tempo (BPM) is
shown in the display.
• If the track changes when the BPM is locked, the lock is removed,
and the auto BPM counter switches on.
NOTE
Depending on the track, the automatic BPM measurement may not
be performed correctly. In this case, perform "TAP Input" or "Manual
BPM input", and measure manually.
SHIFT TIME
, and press .
HOT LIST ADD/REMOVE .
.
See the illustration on the previous page for details of the buttons used for the
28
operations on this page.
Operations during playback
n BPM lock
This function locks data measured by the auto BPM counter.
When the auto BPM counter is on, press
"BPM LOCK" is shown in the display, and the data measured by the
auto BPM counter is locked.
n Measuring BPM manually
TAP Input
The tempo (BPM) is measured according to the interval between
TAP
repeated pressings of the .
When BPM is locked, repeatedly press
the beat.
The measured tempo (BPM) is shown in the display.
Manual BPM Input
Enter the tempo (BPM) as a number.
1
TAP SEL.
Hold down , and turn
BPM value appears on the display.
2
SEL.
Turn to the tempo (BPM) you want to set, and
release TAP .
The set value is entered, and data is locked.
SEL.
• Press and turn to enter numbers below the decimal point.
TAP
.
TAP in time with