Power Consumption - Epson PowerLite 8100 User Manual

Epson powerlite 8100: user guide
Hide thumbs Also See for PowerLite 8100:
Table of Contents

Advertisement

■ Auto Iris
Image > Auto Iris
Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 29).
When this setting is on, the light output is automatically adjusted according to the
brightness of the image. Select either
you would like the projector to respond to changes in the brightness of the image. The
setting is stored separately for each image source and color mode.
■ Setup Level
Signal > Advanced > Setup Level
Note: This setting can be used only when an NTSC signal is being input through the Video or
S-Video port, or when a video signal is being input through the Component video ports.
This setting adjusts the threshold at which dark areas of the image are rendered black
(0 IRE). For compatibility with most DVD and video equipment sold in the United
States, leave this setting at 0%. Check your video equipment's specifications to be sure of
the correct setting.
■ EPSON Super White
Signal > Advanced > EPSON Super White
Note: This setting can be used only when a composite video, S-Video, or component video
signal is being input and the Color Mode is set to THX (Home Cinema 8500 UB), Natural (Home
Cinema 8100), Theatre, Theatre Black 1, or Theatre Black 2 (see page 29).
If bright parts of the image are washed out or overexposed (when the input signal
contains values over 100 IRE), turn this setting on to compensate.
■ HDMI Video Range
Signal > Advanced > HDMI Video Range
Note: This setting can be used only when HDMI1 or HDMI2 is selected as the image source
(see page 24). This setting cannot be used when the Color Mode is set to x.v.Color (see
page 29).
If your video equipment has an HDMI port and you've connected it to the projector
using an HDMI cable, set the level of the projector to match that of the video equipment.

■ Power Consumption

Image > Power Consumption
This setting controls the light output from the projector. On
produces a brighter image and the lamp uses more power. To save power and extend the
life of the lamp, select
36
Making Detailed Adjustments
Normal
.
ECO
or
to indicate how quickly
High Speed
Normal
, the projector

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents