Problem Solving
The authentication setting of wireless LAN fails
Check
Is the time set correctly?
Email is not received even if a problem occurs in the projector
Check
Is Standby Mode set to Communication On?
Did a fatal abnormality occur and the projector come to a sudden
stop?
Is power being supplied to the projector?
Is the Mail Notification function set correctly in the Configuration
menu?
"The battery that saves your clock settings is running low." is displayed.
Check
The internal power supply that saves your clock settings is
running low.
If the wireless LAN is set correctly but the authentication setting fails, the time may not be set correctly. Check
if it is set correctly.
s Extended - Time/Schedule Settings
To use the Mail Notification function when the projector is in standby, set Communication On in Standby Mode from
the Configuration menu.
s Extended - Standby Mode
p.95
When the projector comes to a sudden stop, email cannot be sent.
If the abnormal state continues, contact your local dealer or the nearest address provided in the Epson Projector Contact
List.
Epson Projector Contact List
s
Check that your electrical outlet or power source is functioning correctly.
An error notification email is sent according to the Mail settings in the Configuration menu. Check if it is set correctly.
s "Administrator Settings menu"
p.105
Contact your local dealer or the nearest address provided in the Epson Projector Contact List.
Epson Projector Contact List
s
Remedy
p.95
Remedy
Remedy
125