Images Appear Dark; Problems When Projection Starts; The Projector Does Not Turn On - Epson EB-1965 User Manual

Problem Solving
Check
Are the cables connected correctly?
g
Is the contrast adjusted correctly?
Is the color adjustment set correctly?
Are the color saturation and tint adjusted correctly?
(Only when projecting images from a video source)

Images appear dark

Check
Is the image brightness set correctly?
g
Is the contrast adjusted correctly?
Is it time to replace the lamp?

Problems when Projection Starts

The projector does not turn on

Check
Did you press the [t] button?
Check that all the cables required for projection are securely connected.
Check that no cables are disconnected and that there are no poor contacts in the cables.
s "Connecting Equipment" p.25
Adjust the Contrast setting from the Configuration menu.
s Image - Contrast p.91
Adjust the Gamma, RGB, or RGBCMY setting from the Configuration menu.
s Image - Advanced p.91
s "Adjusting the Image" p.46
Adjust the Color Saturation and Tint settings from the Configuration menu.
s Image - Color Saturation, Tint p.91
Adjust the Brightness and Power Consumption settings from the Configuration menu.
s Image - Brightness p.91
s Settings - Power Consumption p.94
Adjust the Contrast setting from the Configuration menu.
s Image - Contrast p.91
When the lamp is nearly ready for replacement, the images become darker and the color quality becomes poorer. When
this happens, replace the lamp with a new lamp.
s "Replacing the Lamp" p.132
Press the [t] button to turn the power on.
Remedy
Remedy
Remedy
122