Settings Menu - Epson EB-1965 User Manual

List of Functions
Submenu
Reset You can reset all adjustment values on the Signal menu to
their default settings, except for Input Signal.
See the following to return all menu items to their default
settings.
s "Reset Menu"

Settings Menu

Submenu
You can correct keystone distortion.
Keystone
• When H/V-Keystone is selected:
Adjust V-Keystone and H-Keystone to correct horizontal
and vertical keystone distortion.
You can also set Auto H/V-Keystone to On or Off.
s "Correcting Keystone Distortion"
• When Quick Corner is selected:
Select and correct the four corners of the projected image.
s "Quick Corner"
Function
p.109
Function
p.39
p.40
Submenu
Split Screen You can split the screen into two screens.
You can change the Screen Size, and select the Source, Swap
Screens, Audio Source, and Exit Split Screen.
s "Projecting Two Images Simultaneously (Split Screen) "
p.54
You can use this to restrict operation of the projector's control
Control Panel
panel.
Lock
s "Restricting Operation (Control Panel Lock)"
You can select the shape of the pointer.
Pointer Shape
Pointer 1:
Pointer 2:
Pointer 3:
s "Pointer Function (Pointer)"
You can set the lamp brightness to one of two settings.
Power Consump‐
tion
Select ECO if the images being projected are too bright, such as
when projecting images in a dark room or onto a small screen.
When ECO is selected, the power consumption and the lamp's
operating life are changed as follows, and fan rotation noise
during projection is reduced.
Electrical consumption: about 25% decrease, lamp life: about 1.4
times longer
You can adjust the volume. Setting values are saved for each
Volume
source.
You can limit the reception of the operation signal from the
Remote Receiver
remote control.
When set to Off, you cannot perform any operations from the
remote control. If you want to make operations from the remote
control, hold down the [Menu] button on the remote control for
at least 15 seconds to reset the setting to its default value.
94
Function
p.69
p.59