Reset Menu; Info Menu (Display Only) - Epson EB-1965 User Manual

List of Functions
SNMP menu
Submenu
SNMP Set to On to monitor the projector using SNMP
the projector, you need to install the SNMP manager program on
your computer. SNMP should be managed by a network
administrator. The default value is Off.
You can register up to two IP addresses for the SNMP trap
Trap IP Address
notification destination.
1/Trap IP Ad‐
dress 2
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from
0 to 255)
Set the community name of SNMP. You can enter up to 32 single-
Community
byte alphanumeric characters.
Name
Function
g
. To monitor

Reset menu

Resets all of the network settings.
Submenu
To reset all of the Network settings, select Yes.
Reset network
settings.
When you reset the network settings , the Passphrase,
Administrator Password and Manage Certificates menu settings
change back to their default values, and the certificates are
deleted.
After you reset all the settings, the Basic menu appears.

Info Menu (Display Only)

Lets you check the status of the image signals being projected and the status
of the projector. Items that can be displayed vary depending on the source
currently being projected. Depending on the model used, some input
sources are not supported.
108
Function