Interference Or Distortion Appear In Images; The Mouse Cursor Flickers (Only When Projecting Usb Display) - Epson EB-1965 User Manual

Problem Solving

Interference or distortion appear in images

Check
Is the image signal format setting correct?
(Only when projecting images from a video source)
Are the cables connected correctly?
Is an extension cable being used?
Is the correct resolution selected?
(Only when projecting computer images)
g g
Are the Sync. and Tracking settings adjusted correctly?
(Only when projecting computer images)
Is the Resolution set to anything other than Auto?
(Only when projecting on a split screen)
Is Transfer layered window selected?
(Only when projecting USB Display)

The mouse cursor flickers (only when projecting USB Display)

Check
Is Make the movement of the mouse pointer smooth. selected?
Change the setting according to the signal for the connected equipment.
s Signal - Video Signal p.92
Check that all the cables required for projection are securely connected.
s "Connecting Equipment" p.25
If an extension cable is used, electrical interference may affect the signals. Use the cables supplied with the projector to
check if the cables you are using may be causing the problem.
Set the computer so that the signals being output are compatible with the projector.
s "Supported Monitor Displays" p.144
s Computer's documentation
Press the [Auto] button on the remote control or the [
If the images are not adjusted correctly even after performing automatic adjustment, you can also make adjustments
from the Configuration menu.
s Signal - Tracking, Sync. p.92
The image may be collapsed if the Resolution on the Configuration menu and the resolution of the projected image are
not the same.
If the image is collapsed, set the Resolution to Auto.
s Signal - Resolution p.92
Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Vx.xx Settings, and then clear the
Transfer layered window checkbox.
Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Vx.xx Settings, and then select
Make the movement of the mouse pointer smooth. (This is not available for Windows 2000.)
For Windows Vista/7, Windows Aero is disabled when this is selected.
Remedy
] button on the control panel to perform automatic adjustment.
Remedy
120