Adjusting The Image Position; Adjusting The Horizontal Tilt; Correcting The Focus - Epson EB-1965 User Manual

Adjusting Projected Images

Adjusting the Image Position

Press the foot adjust lever to extend and retract the front adjustable foot.
You can adjust the position of the image by tilting the projector up to 16
degrees.
a
The larger the angle of tilt, the harder it becomes to focus. Install the
projector so that it only needs to be tilted at a small angle.

Adjusting the Horizontal Tilt

Extend and retract the rear feet to adjust the projector's horizontal tilt.
A
Extend the rear foot.
B
Retract the rear foot.

Correcting the Focus

You can correct the focus using the focus ring.
This projector comes with a built in function to help make accurate focus
adjustments.
Press the [Focus Help] button on the control panel to display the focus
adjustment dialog. Adjust the focus ring to increase the green number
displayed. The orange number displayed shows the maximum value
available during adjustment that differs depending on the projection
environment.
You can use focus help to correct the projected image under the following
conditions.
45