Table of Contents
Advertisement
Solutions When Wireless Authentication Fails
Solutions When the Image Contains Static During Network Projection
Parent topic:
Solutions When Wireless Authentication Fails
If you cannot authenticate a wireless connection, try the following solutions:
• Make sure the Wireless LAN Power setting is set to On.
• Check the Security settings and passphrase in the Network Configuration menu.
• Check the Event ID number displayed in the Info menu and check the link below to identify the
problem.
Parent topic:
Related references
Projector Feature Settings - Settings Menu
Projector Network Settings - Network Menu
Event ID Code List
Solutions When the Image Contains Static During Network Projection
If the projected image contains static during network projection, try the following solutions:
• Check for any obstacles between the access point, the computer, the mobile device, and the projector.
If necessary, change their positions to improve communication. Also make sure that they are not too
far apart; move them closer together and try to connect again.
• If the wireless connection is slow or your projected image contains noise, check for interference from
other equipment, such as a Bluetooth device or microwave. Move the interfering device farther away
or expand your wireless bandwidth.
• If the connection speed declines, reduce the number of connected devices.
Parent topic:
Where to Get Help
If you need to contact Epson for technical support services, use the following support options.
Internet Support
Visit Epson's support website at
epson.com.jm/support
Solving Problems
Solving Network Problems
Solving Network Problems
epson.com/support
(Caribbean) and select your product for solutions to common problems with your
(U.S.),
epson.ca/support
162
(Canada), or
Advertisement
Table of Contents
