Table of Contents
Advertisement
3. Camera Control
Move the cursor to the "Camera Control" position
by pressing the Up (D) Switch or the Down (C)
Switch, then press the Set Switch to display the fol-
lowing display on the monitor screen.
** Program Menu **
Camera Control *
Receiver Control *
Camera Set Up *
Controller Set Up *
Press the Set Switch repeatedly to select the desired
functions. The function is selected as shown in the fol-
lowing sequence.
Iris
Sens Up
ATW, AWC
B
close Iris open
Fig. 3
Shutter
BLC
AGC
3-1. Lens Iris Control
The following function is available only when speci-
fied lens is mounted on the specified camera.
1. Display the Iris Menu as shown in Fig. 4 by repeat-
ing the previous procedures.
close Iris open
2. Press the Right (B) Switch to open the lens iris or
press the Left (A) Switch to close the lens iris.
Adjust the lens iris by pressing the switches to
obtain the proper picture exposure.
While pressing the switches, the character is
inversely displayed on the monitor screen.
3. By pressing both of these switches at the same
time for one second, the lens iris is set to the facto-
ry preset condition.
-15-
Fig. 4
Advertisement
Table of Contents
