Back Case Removal; Ca If Unit And Plate (Camera Connection) Removal - Panasonic AJ-RC905EN Service Manual

1-3. Back Case Removal

1. Unscrew the 4 screws (D) and then lift up the
Anton Battery Adaptor.
Disconnect the Battery Cable Connector and
2.
then remove the Anton Battery Adaptor.
Unscrew the 4 screw (E) and then lift up the
3.
Back Case.
Power
Cable
Cable
Hole
Back Case
Make the Battery Cable pass through the hole
4.
of the back case, and then remove the Back
Case.
(D)
Anton Battery
Adaptor
Battery
Cable
Connector
Anton
Battery
Adaptor
(E)
DIS-5
1-4. CA IF Unit and Plate (Camera
Connection) Removal
1. Unscrew 2 screws (F) and lift up the CA IF Unit.
2. 2. Disconnect the connector P61 and remove
the CA IF Unit.
3. Disconnect the connector P3.
4. Unscrew 4 screws (G) and then remove the Plate
Unit.
(F)
CA IF Unit
CA IF Unit
P3
P61
(G)
Plate Unit