Table of Contents
Advertisement
(4) Parity Check Setting
1. Display the communication Menu as shown in
Fig. 30 by repeating the previous procedures.
2. Move the cursor to the "Parity Check" position
by pressing the Up (D) Switch or the Down
(C) Switch. Select the desired parity check,
None, Odd or Even, by pressing the Right (B)
Switch or the Left (A) Switch.
(5) Stop Bit Setting
1. Display the Communication Menu as shown in
Fig. 30 by repeating the previous procedures.
2. Move the cursor to the "Stop Bit" position by
pressing the Up (D) Switch or the Down (C)
Switch.
Select the desired stop bit, 1 or 2, by pressing
the Right (B) Switch or the Left (A) Switch.
(6) Xon / Xoff
1. Display the Communication Menu as shown in
Fig. 30 by repeating the previous procedures.
2. Move the cursor to the "Xon / Xoff" position by
pressing the Up (D) Switch or the Down (C)
Switch.
Select desired mode, Not Use or Use, by
pressing the Right (B) Switch or the Left (A)
Switch.
(7) Wait Time Setting
1. Display the Communication Menu as shown in
Fig. 30 by repeating the previous procedures.
2. Move the cursor to the "Wait Time" position by
pressing the Up (D) Switch or the Down (C)
Switch.
Select the desired wait time, Off or 100mS -
1000mS by pressing the Right (B) Switch or
the Left (A) Switch repeatedly.
(8) Delay Time Setting
1. Display the Communication Menu as shown in
Fig. 30 by repeating the previous procedures.
2. Move the cursor to the "Delay Time" position
by pressing the Up (D) Switch or the Down
(C) Switch. Select the desired delay time, Off
or 10mS - 100mS, by pressing the Right (B)
Switch or the Left (A) Switch repeatedly.
(9) Alarm Data Setting
This setting determines whether the alarm data
received from the camera is transmitted or not
-29-
Advertisement
Table of Contents
