Advertisement
Table of Contents
INSTALL INSTRUCTIONS C-TM-EXPD-1
TOOLS REQUIRED:
Metric socket set
Standard socket set
Impact wrench
HARDWARE:
QTY DESCRIPTION
16
¼-20 x 3/4" Hex Head Bolt
8
¼" Flat Washer
8
¼" Lock washer
8
¼" Serrated nut
1
Front transmission hump bracket
1
Rear transmission hump bracket
2
½" x 1" Thread cutting screws
1
32" Trak Mount
Read all instructions before installing any Havis-Shields Equipment Corp products.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
For product support, visit the Install Instructions Section of our website at
http://havis.com/Installation/Installation.html
Front
Place front hump bracket
under front seat brackets
and attach with OEM seat
bolts
HEAVY DUTY TRAK MOUNT
2007-2008 FORD EXPEDITION
Always
Tap and Die Set
7/16" wrench
PART #
GSM33001
GSM31005
GSM31026
GSM30023
C-B48
C-B49
GSM33304
C-TM-32E
!
Attach rear bracket with
½" self threading bolts to
existing OEM holes under
floor mat
Rear
C-TM-EXPD-1_INST_10-07
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Havis-Shields Heavy Duty Trak Mount 2007-2008 Ford Expedition C-TM-EXPD-1
Summary of Contents for Havis-Shields Heavy Duty Trak Mount 2007-2008 Ford Expedition C-TM-EXPD-1
- Page 1 Rear transmission hump bracket ½” x 1” Thread cutting screws 32” Trak Mount Read all instructions before installing any Havis-Shields Equipment Corp products. Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes! Use hardware provided with install kit For product support, visit the Install Instructions Section of our website at http://havis.com/Installation/Installation.html...
- Page 2 The 2008 Expedition ( 6/07 built date or newer ) has a Roll Stability Control module ( RSC) in addition to the side impact control module mounted at forward section of transmission hump. *** Do NOT Remove or Move these modules *** INSTALLATION: 1.
Need help?
Do you have a question about the Heavy Duty Trak Mount 2007-2008 Ford Expedition C-TM-EXPD-1 and is the answer not in the manual?
Questions and answers