Switching Audio Modes; Setting Time (Clock Adjust) - Eclipse CD1200G Manual

Basic operation
[SOURCE] button
[VOL] button

Switching Audio Modes

1
Press the [SOURCE] button.
Press the button to switch modes in
the following sequence:
FM/AM  CD(MP3/WMA/AAC)*
AUX*  FM/AM...
3
*1: Cannot be selected if the corresponding device is
not connected to the main unit.
*2: Not displayed if no disc is inserted.
*3: Cannot be selected if the AUX mode is not set to ON.
For details, refer to "Switching the AUX mode on and off"
on page 72.

Setting time (Clock Adjust)

This main unit uses the 12-hour display notation.
1 Check that the main unit is in standby (When the clock is
displayed).
2
Press and hold the [DISP] button.
When the clock display is flashing.
3
Turn the [VOL] button to adjust the time.
Right:
The minutes will advance.
Left:
The hours will advance.
4
Press the [DISP] button briefly.
[DISP] button
 USB*
2
24
 iPod*
1 1 