Charging The Batteries - Silvercrest SCA 5.00 A1 User Manual And Service Information

SilverCrest SCA 5.00 A1

Charging the Batteries

The camcorder is powered by a rechargeable Lithium-Ion (FUJI
ELECTRONICS (SHENZHEN) CO., LTD. NP40) battery. On
delivery, the batteries are not charged. Please charge the batteries
before first use of the device.
Insert the rechargeable battery in the charger cradle Technics-GP
TC03G-2U025-0421D so that the contacts (+) and (-) correspond to
the rechargeable battery and charging tray markings.
Make sure that the battery clicks into place on the charger. Next
connect the power cord to the charger and plug the power cord to a
wall outlet.
To power the camcorder, use only the rechargeable
Lithium-Ion
(SHENZHEN) CO., LTD. NP40.
Remove the
camcorder when the device is not to be used for a
long time.
During charging, the rechargeable battery and
charging device will become warm. This is not a
malfunction.
battery FUJI
rechargeable
Introduction
ELECTRONICS
battery from
English - 17
the