TANDBERG 1000MXP User Manual page 25

1. Mic Off turns your microphone on and
off, see Mic off.
2. Arrow keys are used for navigation in
the menu and for moving the camera*
when the menu is hidden, see
Navigation.
3. Volume + and – adjusts the Codec
volume only and not the monitor's
volume, see Volume + and
4. The Layout key toggles between full
screen and different display layouts, see
Layout.
5. Cancel takes you back one step in the
menu system. Use Cancel to delete
characters in an input field, see
Navigation.
6. Press the Call key to place a call, see
Make a Call.
7. Camera presets define specific camera
positions. Move the camera to the
desired position and press and hold a
number key for 1 second to save the
current camera position to that number
key. To activate a preset whilst in a call,
simply press and release that number
key, see Camera Presets.
8. Snapshot takes a snapshot of your video
only while you are in a call, see
New Snapshot.
9. The Presentation key switches to a
predefined presentation source. If the
Presentation key is held down for 1
second then the Presentation video
sources menu will appear, see
Presentation Key.
10. Press OK/Menu to show the menu and
to select menu items, see Navigation.
11. Use Zoom + and – to zoom the camera
in and out.*
12. Selfview displays your outgoing video.
Press Selfview again to turn selfview off,
see Selfview.
13. Use the Phone Book to store and recall
video contacts for easy placement of
calls, see Phone Book.
14. Use the red End Call key to end the
current call. Pressing this key when not
in a call will place the system in Standby
mode, see End Call
15. Number/Letter keys function in the same
manner as with a mobile or cellular
phone, see Number and Letter
16. Press Touch tones when you are in a
General Use
-.
Take
and Standby.
keys.
17