TANDBERG 1000MXP User Manual page 21

should be entered under "New Bandwidth Key". For more information on these
options, please contact your TANDBERG representative.
6. Save changes
Remember to save any changes made in a menu by selecting the Save button on the
menu line and pressing OK.
Network configuration:
1. Open the Network menu
Press OK/Menu to open the Main Menu, if not already displayed. Select Control
Panel - Administrator Settings - Network to open the Network menu.
2. ISDN configuration
Set the Network type to the desired network. Specify the settings for the selected
network in the relevant menu. For details, follow the instructions in
Settings. See also the examples in
Switched 56 network
network adapters.
3. LAN configuration
Select LAN Settings in the Network menu and specify the necessary LAN settings
according to the instructions from your LAN administrator. For details, follow the
instructions in
refer to H.323 Settings
4. Network Profiles
Please refer to
5. Data Port
Please refer to Data Port for details
6. Save changes
Remember to save any changes made in the menu by selecting the Save button on
the Menu line and pressing OK.
Appendix 9: Connecting the system to the
and in Appendix 10: Connecting the system to ISDN using NT1
LAN Settings. If there is an H.323 Gatekeeper present on your LAN,
as well.
Network Profiles for details
Installation
ISDN-BRI
13