Controls And Indicators - Printronix

P9212 Maintenance Manual

Controls and Indicators

Switch or
Indicator
NOTE:
Power Switch
Status lamps
Y
B
A
"
1–4
Standard Electrical Controls (Figure 1–1)
ON LINE and VIEW are the only switches that operate when the printer
is on–line. The other switches operate only when the printer is off–line.
Turns printer on and off: up = on, down = off. This
switch is also a circuit breaker.
On when the printer is on–line, off when printer is
off–line. Flash to indicate a fault or warning.
LCD The Liquid Crystal Display (LCD) displays printer status
and error messages.
ON LINE Toggles the printer on–line and off–line.
FF Advances paper to top of form on next page.
NLQ Toggles the printer font between NLQ–10 or DP–10.
Clears printer after a fault is corrected. Returns printer to
CLEAR
off–line state from within a configuration menu. Resets
printer to most recently saved configuration when
pressed simultaneously with ENTER switch.
VIEW Advances paper for viewing through cover window,
then returns paper to print position.
SET TOF
Sets location of first line of print on a page.
Selects one of four predetermined printer configurations.
CONFIG
ENTER Enters displayed parameter into printer nonvolatile
memory. Must be unlocked before using.
Locks and unlocks ENTER switch when pressed with B
(UP)
switch. Causes display of configuration menus,
submenus, and diagnostic tests.
See above.
(DOWN)
Displays previous parameter in a configuration or
(PREV)
diagnostic test menu.
Displays next parameter in a configuration or diagnostic
(NEXT)
test menu.
Function
Overview