Specifications - Epson ELPMB27 Product Overview

Short-throw wall mount for epson powerlite 420, 425w, 430, 435w projectors

Hide thumbs Also See for ELPMB27:

Installation manual (21 pages)

page of 2

/ 2
Bookmarks

Short-throw Wall Mount

For ePSoN

Powerlite

Product Name

Short-throw Wall Mount

for PowerLite 420, 425W, 430 and

435W Projectors (ELPMB27)

Adjustment mechanism

Horizontal Tilt

±5 degrees (default 0°)

Horizontal Slide Adjustment Range

±45 mm (1.77 inches)

Projection Distance Adjustment Width

510 +/-3 mm (20 +/- 0.12 inches)

Vertical Slide Adjustment Range

Min. 134 mm (5.27 inches) (Arm length min.)

Min. 230 mm (9.06 inches) (Arm length max.)

Vertical Tilt

95 (-0.5/+0)~106.5 (-0/+0.5) degrees

Horizontal Rotation Adjustment Range

±5 degrees (default 0 degrees)

Horizontal Roll Adjustment Range

±5 degrees (default 0 degrees)

Vertical Tilt Adjustment Range

0 to -11 degrees (default 0 degrees)

Wall plate dimensions, mm (inches)

For more information on epson's environmental programs, go to

Epson America, Inc.

3840 Kilroy Airport Way, Long Beach, CA 90806

epson and Powerlite are registered trademarks, epson exceed Your Vision is a registered logomark and Better Products for a Better Future is a trademark of Seiko epson corporation. Brightlink

Solo is a registered trademark of epson america, inc. Smartway is a service mark of the u.S. environmental Protection agency. all other product and brand names are trademarks and/or registered

420, 425w, 430, 435w Projectors

Product Code

V12H003Z27

Safety

Fall Prevention Wire

(inside wall plate cover)

Yes

Weight Resistance

44 lb (20 Kgf)

Hang Down Strength

132 lb (60 Kgf)

Epson Canada Limited