Specifications - Epson BrightLink 475Wi User Manual

Specifications

Item
Weight
Maximum load capacity
Forward/backward adjustment
range of the adjuster bolt
Table Requirements
Install the mount on a table that meets the following conditions.
The tabletop is strong enough to support the weight of the mount.
The table is stable enough not to collapse after installation of the mount.
The table is strong enough to support the weight of the projector and the mount.
The table surface is a light color such as white.
The tabletop is 0.6 to 3.1 inches (15 to 80 mm) thick.
The tabletop is larger than the minimum sizes below.
See the projection distance table on page 7 for the image size.
Minimum table sizes for BrightLink 475Wi/BrightLink 475wi+/BrightLink 485Wi/BrightLink 485wi+
Mounting
Position
65 inches (1651 mm)
60 inches (1524 mm)
Minimum table sizes for BrightLink 480i
Mounting
Position
60 inches (1524 mm)
56 inches (1422 mm)
Specification
Approx. 16.5 lb (7.5 kg)
14.3 lb (6.5 kg )
3.1 inches (80 mm)
Image Size
(Diagonal)
48 × 55.8 inches
(1220 × 1417 mm)
44.9 × 52 inches
(1140 × 1321 mm)
Image Size
(Diagonal)
48.4 × 48.7 inches
(1230 × 1238 mm)
45.7 × 45.6 inches
(1160 ×1158 mm)
5
Note
Distance between the edge of the table and the center of
the bolt: 1.4 to 4.5 inches (35 to 115 mm)
Rectangular Table
80 inches (2032 mm)
75 inches (1905 mm)
Rectangular Table
70 inches (1778 mm)
65 inches (1651 mm)
Round Table
(Diameter)
Round Table
(Diameter)