Related Manuals for Clarke SHHH2
Summary of Contents for Clarke SHHH2
- Page 1 SHHH AIR COMPRESSOR Model Nos. SHHH2 - SHHH2/9 - SHHH3/9 - SHH3/24 OPERATING & MAINTENANCE INSTRUCTIONS © 1205...
- Page 2 PARTS & SERVICE For Spare Parts and Service,please contact your nearest dealer, or CLARKE International, on one of the following numbers. PARTS & SERVICE TEL: 020 8988 7400 PARTS & SERVICE FAX: 020 8558 3622 e-mail as follows: PARTS: Parts@clarkeinternational.com SERVICE: Service@clarkeinternational.com...
-
Page 3: Table Of Contents
Thank you for purchasing this CLARKE Shhh Air silent running air compressor Before attempting to operate the machine, please read this leaflet thoroughly and carefully follow the instructions given. In doing so you will ensure the safety of yourself and that of others around you, and you can also look forward to the compressor giving you long and satisfactory service. -
Page 4: Safety Precautions
DO NOT operate your compressor with any guards removed. Electrical or mechanical repairs should only be carried out by a qualified engineer. If problems occur, contact your Clarke dealer. Before carrying out any maintenance, ensure the pressure is expelled from the air receiver, and the machine is disconnected from the mains supply. -
Page 5: Electrical Connections
We recommend that this machine is connected to the mains supply via a Residual Current Device (RCD) If in any doubt, DO NOT attempt any connections or repairs yourself. Consult a qualified electrician, your Clarke dealer, 020 8556 4443 or telephone CLARKE International Service Dep’t on: or, e-mail : Service@clarkeinternational.com... -
Page 6: Preparation For Use
(see fig. 2). If you release air, by opening the air outlet tap, the motor will start automatically once the cut-in pressure is reached. (This does not apply to the SHHH2) Before connecting your airline to the compressor,allow it to run for 10 - 15 seconds, with the air outlet tap,(A, Fig. -
Page 7: Shutting Down
Before transporting your compressor or when leaving Fig.4 overnight, expel all air from the receiver by opening the drain valve Fig 6. (Does not apply to the SHHH2) IMPORTANT: DO NOT FORGET to close the valve again when the tank is empty, particularly if the... -
Page 8: Fault Finding
Compressor does Air receiver charged Open drain valve to expel air. not start. (Does ot apply to Compressor should start again SHHH2) when pressure reduces to (see also item 1) approx 95 psi. Inlet Air Filter is blocked The compressor... -
Page 9: Maintenance
MAINTENANCE DAILY 1. Check the oil level before you start and top up if necessary - use Clarke Synthetic Air Compressor Oil ONLY, available from your Clarke dealer... Part No. 3050795 The oil level is checked by viewing the oil Fig.5... -
Page 10: Specifications
For details contact your local Clarke dealer. A complete kit - Model KIT 1000, illustrated below, is available from your Clarke dealer, ideal for many applications..Please quote part number 3110155...